| Tube Voltage | 70KV |
| Tube Current | 2mA |
| Exposure Time | 0.04~2s |
| Tube Focus | 0.4mm(Canon Tube) |
| Dose Rate | 2mGy/s |
| Frequency | 50/60Hz |
| Nominal Electric Power | 0.14KW(70KV, 2Ma, 0.1s) |
| Charger Input Voltage | 100V~240V |
| X Ray Tube Model | D-045 |
| Target Material | Tungsten |
| Power | 30VA |
| Ray Direction And Distribution | Diameter of beam limiter exit direction 60mm |
| Internal Power | 10.8V |
| Weight | 1.7KG |
★Wide digital display for easy operation.
★2mA tube current, combines higher performance, and high definition imaging.
a. Preparation: Insert the battery into the device.
b. Turn On: Long Press the Power ON switch and the LCD display will glow, notifying with beep sound.
c. Check: Check for the sufficient battery level.
d. Mode Selection: Adult/ildren & then tooth selection.
e. Exposure time: The system has a default time setting, users can also adjust the shooting time as needed.
f. Imaging: Choose film or sensor imaging for the patient’s teeth in the required area, press the exposure button, emit rays and have a notify sound.
| 1. Beam limiter | 2. Power switch | 3. Hand exposure device |
| 4. Display | 5. Function keys button | 6. Charge port |
| 7. Battery house | 8. Exposer button | 9. Support interface |